Floor Membrane - 40m2
DELTA®-MS 20 is a compression-resistant, durable dimpled sheet made from special high density polyethylene.
This is a heavy gauge version of DELTA®-MS with deep 20mm studs. This is used where extra drainage capacity is required, for example on deeper structures, or where a larger flow rate is required. DELTA®-MS 20 can also be used as a “cavity former” for many types of new construction.
DELTA®-MS20 is used as damp-proofing on walls, floors and vaulted ceilings, above and below ground, in new construction or in existing buildings over a contaminated or damp background. It can support a dry lining, screed or flooring, in the following situations:
- on damp walls and floors in underground situations subject to high groundwater levels, and perennial moisture
- on vaulted ceilings of archways or cellars subject to water in gressin conjunction with a remedial dpc system where the walls and floors have a high salt content, and/or it is necessary to complete the installation immediately without allowing a period for initial drying
- over walls and floors which have a friable or painted surface, are contaminated (e.g with oil or mould), or have a high salt content as a waterproofing membrane in areas subject to vibration.
Depending on the application required and the site conditions, the membrane may be used as:
- an underfloor damp-proof membrane
- a dry lining for walls, ventilated into the room via aeration slots at the top and bottom of the wall or via passive air vents, where access through an external wall is available
- a sealed system covering wall, floor and ceiling with provision made for disposing of water build-up behind the membrane via a sump and pump.
Delta MS20 Key Factors
Resistance to water and water vapour — the product is water resistant and has a high resistance to water vapour transmission.
Resistance to salt transfer — the product provides an effective barrier to the transmission of salts or other contaminants from the substrate.
Resistance to puncture, impact and loading — the membrane has a high resistance to puncture and will not be damaged by normal foot traffic during installation, or while laying concrete or screeding. It can support the long-term loadings likely to be experienced in service without undue deformation.
Durability — under normal conditions of use the membrane will provide an effective barrier to the transmission of salts, liquid water and water vapour for the life of the structure in which it is incorporated.
Delta MS20 Installation Video
Model: DEMS20/40 SKU DEMS20/40 Manufacturer Delta Membranes Packaging: Individually Size 2 metres x 20 metres (40m²) Coverage 40m² BBA Certificate Certification No: 00/3742
Approved by the British Board of Agreement
Country of Manufacture: Germany
Delta MS20 Floor Data Sheet (1.6 MB)
You may also be interested in the following product(s)
RRP £675.00 Excl. VAT£625.00 Excl. VAT £750.00 Incl. VAT
RRP £20.00 Excl. VAT£17.00 Excl. VAT £20.40 Incl. VAT
RRP £1,125.00 Excl. VAT£895.00 Excl. VAT £1,074.00 Incl. VAT