Delta V3 Foul Pump and Sump
Sump Pump for Foul Water
This Delta sump pump unit is designed to collect foul water in a basement where there are other facilities in the property that rely on gravity drainage. It can also be used in ground floor extensions.
The pumps are commonly used where basements are fitted with a toilet and/or a utility room. The 612SA foul vortex pump is able to deal with both foul water and grey water from showers and hand basins. The pump is designed to cope with solids, discharging foul water to a suitable drain.
What is included:
- 1 x 612SA foul vortex pump
- 1 x sump chamber & fittings
Installation of Foul Water Sump Pump
The Foul V3 sump sits on a concrete base. Standard 110mm inlet pipes are connected along with a 50mm discharge pipe that runs from the chamber to a drain.
The chamber is filled with water to prevent flotation and back filled with concrete to lock it into structure.
A double sealed manhole cover should be fitted in the final screed, providing access to the foul sump.
A full range of installation and maintenance instructions are supplied with each Delta V3 Foul Sump Unit.
Note: This sump pump is not designed to collect groundwater - this should be managed separately by a standard dual sump pump.
- Effectively deals with foul & grey water in basement applications
- All internal pipe work pre-installed
- Powerful pump
|Colour||Yellow sump chamber|
|Country of Manufacture||United Kingdom|
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
Review this product
Share your thoughts about this product with other customers, write a review.