Delta Dual V6 Sump - 2 x V6 pumps
Sump Pump for Deep Basements
The Delta Dual V6 Sump & Pump Unit is designed for use in deep basements, basements of more than one storey or where long discharge runs are required.
The Dual V6 are upgrades to the standard Dual V3 sump pumps where higher discharge heads are required. They can collect groundwater from a cavity drainage membrane system and light wells that totals up to 12m².
Groundwater enters via the membrane system and drainage channels and collects through the top opening of the sump or via three 110mm pipe inlets. The water is then pumped via two powerful V6 float-activated submersible pumps to mains drainage or another suitable outlet.
Dual V6 Sump Pump Installation
The Delta Dual V6 Sump Unit has been designed with ease of installation in mind.
There are no specialist tools or skills required to install and all relevant adaptors are supplied.
The sump unit is delivered to site with all internal pipe work pre-installed. Only a simple screw on fitting is necessary to connect the pump. The unit is lowered into the excavation and all pipework and cable duct connections are made.
The pump station is filled with water to prevent flotation then back filled with 100mm concrete around the sump to form part of the floor slab. An access cover is set over the sump for maintenance purposes.
- Higher discharge head
- Easy to install – no specialist tools required
- All internal pipe work pre-installed
- Accessible for maintenance
|Country of Manufacture||United Kingdom|
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
Review this product
Share your thoughts about this product with other customers, write a review.