ISO-THERM BOND PLUS Adhesive 15kg
ISO-THERM BOND PLUS Adhesive 15kg is a ready-mixed, quick-drying adhesive developed to bond ISO-THERM Internal Wall Insulation Membrane 7m² securely to internal wall surfaces.
Ready mixed - no site mixing required
Quick drying - designed to dry within 24 hours
Enhanced bond - polymer technology improves early bond strength
Wide substrate use - suitable for plaster, masonry, concrete and more
Expert support - practical technical guidance from Waterproof & Dry
ISO-THERM BOND PLUS Adhesive 15kg
ISO-THERM BOND PLUS Adhesive 15kg (formerly known as ISO-THERM Superbond Adhesive 15kg) is a ready-mixed adhesive developed specifically for installing ISO-THERM Internal Wall Insulation Membrane 7m². Its polymer-enhanced formulation provides improved early bond strength and a quick drying time, helping keep installation moving efficiently.
It can be used on suitably prepared plaster, plasterboard, sand and cement render, concrete, masonry and painted surfaces. A 15kg bucket typically covers around 7m², although substrate condition and porosity can affect consumption.
Typical Applications
- Bonding ISO-THERM Internal Wall Insulation Membrane 7m² to plaster and plasterboard
- Installation onto prepared render, concrete and masonry
- Bonding to suitably prepared matt or silk painted internal surfaces
Top Tip
"Mix ISO-THERM BOND PLUS Adhesive 15kg to a uniform paste before use. Apply with a notched trowel and only spread an area you can cover with membrane within around 20 minutes."
You May Also Need…
ISO-THERM BOND PLUS Adhesive 15kg is designed as part of the ISO-THERM system, so choosing the correct membrane or complete kit makes project planning simpler.
- ISO-THERM Internal Wall Insulation Membrane 7m² — the ultra-thin thermal membrane that ISO-THERM BOND PLUS Adhesive 15kg is designed to install.
- ISO-THERM Internal Wall Insulation Kit 7m² — combines one membrane roll with the dedicated adhesive.
- DPC Injection Cream 80 - 310ml — suitable where rising damp has been identified and requires separate treatment.
Waterproof and Dry - trusted suppliers of Damp Proofing products
Waterproof & Dry supplies reliable damp-proofing and waterproofing products for trade professionals, contractors and homeowners. We focus on clear product information, dependable service and practical technical support. If you need help with quantities, preparation or the suitability of ISO-THERM BOND PLUS Adhesive 15kg, email [email protected] or call 0117 332 4747.
Browse the Damp Proofing category.
Features
- ISO-THERM BOND PLUS Adhesive 15kg is supplied ready mixed for straightforward application.
- Quick-drying formulation allows the installed membrane to be plastered after a minimum of 24 hours.
- Polymer technology enhances early bond strength.
- Suitable for a wide range of common internal wall substrates.
| SKU | WADWYISOB |
|---|---|
| Coverage | Typically covers around 7m² per 15kg bucket at 2.2kg/m², depending on the substrate |
| Country of Manufacture | United Kingdom |
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
0
0
Review this product
Share your thoughts about this product with other customers, write a review.
