ISO-THERM Internal Wall Insulation Kit 7m²
ISO-THERM Internal Wall Insulation Kit 7m² combines ultra-thin breathable insulation with its dedicated adhesive for a practical system to warm cold, damp-prone internal walls.
Complete system - membrane and dedicated adhesive supplied together
Ultra-thin insulation - 5mm membrane limits internal build-up
Approx. 7m² coverage - one membrane roll plus one 15kg adhesive bucket
Breathable damp control - helps manage cold, damp-prone internal walls
Expert support - practical technical guidance from Waterproof & Dry
ISO-THERM Internal Wall Insulation Kit 7m²
ISO-THERM Internal Wall Insulation Kit 7m² provides the two main components required to create an ultra-thin thermal lining on cold and damp-prone internal surfaces. Each kit contains one 0.95m x 7.5m roll of ISO-THERM Internal Wall Insulation Membrane 7m² and one 15kg bucket of ISO-THERM BOND PLUS Adhesive 15kg (formerly known as ISO-THERM Superbond Adhesive 15kg).
The nominal 5mm woven polyester membrane has thermal conductivity of 0.037 W/mK and is both vapour permeable and waterproof. Combined with its dedicated polymer-enhanced adhesive, the system provides a practical way to improve cold internal surfaces while helping resist lateral damp transfer and the conditions associated with condensation and surface mould.
Typical Applications
- Improving thermal comfort on cold internal walls
- Damp wall restoration using a thin, breathable internal lining
- Helping address condensation and surface mould on cold internal surfaces
Top Tip
"Measure both your wall area and substrate condition before ordering. One bucket of ISO-THERM BOND PLUS Adhesive 15kg typically covers around 7m², but porous surfaces can increase adhesive consumption."
You May Also Need…
For larger projects, the individual ISO-THERM components let you add extra membrane or adhesive without purchasing another complete kit.
- ISO-THERM BOND PLUS Adhesive 15kg — useful where an absorbent substrate means additional adhesive is required.
- ISO-THERM Internal Wall Insulation Membrane 7m² — add individual rolls when the project area exceeds one kit.
- DPC Injection Cream 80 - 310ml — suitable where rising damp has been identified and requires separate treatment.
Waterproof and Dry - trusted suppliers of Damp Proofing products
Waterproof & Dry supplies reliable damp-proofing and waterproofing products for trade professionals, contractors and homeowners. We focus on clear product information, dependable service and practical technical support. If you need help calculating quantities or deciding whether ISO-THERM Internal Wall Insulation Kit 7m² suits your project, email [email protected] or call 0117 332 4747.
Browse the Damp Proofing category.
Features
- ISO-THERM Internal Wall Insulation Kit 7m² supplies the membrane and its dedicated adhesive together.
- Nominal 5mm insulation keeps loss of internal room space to a minimum.
- Vapour-permeable, waterproof membrane helps manage damp while improving thermal performance.
- Flexible membrane is easy to cut and can be plastered directly once the adhesive has dried.
| SKU | WADWYISOK/1 |
|---|---|
| Coverage | Covers approximately 7m² per kit; supplied with 7.125m² of membrane and one 15kg adhesive bucket |
| Country of Manufacture | United Kingdom |
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
0
0
Review this product
Share your thoughts about this product with other customers, write a review.
